| PART |
Description |
Maker |
| F600 F600-D4N |
RELAY - NONLATCH 6 PDT, 10 AMP
|
List of Unclassifed Manufacturers
|
| X-D2A |
RELAY - NONLATCH 2 PDT, LOW LEVEL TO 5 AMP
|
List of Unclassifed Man...
|
| J-A1A |
Solid State Relay, 2 PDT, 12A, Relay-Nonlatch
|
Leach International
|
| JL-D4N-300L |
RELAY - LATCH 2 PDT, 12 AMP
|
List of Unclassifed Manufacturers
|
| ST-REL7-KG24 |
Relay connector, fitted with miniature switching relay, contacts (AgNi): Medium to large loads, 2 PDT, 24 V AC/ DC input voltage, with light indicator, can be plugged into basic terminal blocks
|
PHOENIX CONTACT
|
| DEK-REL-G24 |
Relay terminal block, with soldered-in miniature power relay, contacts (AgSnO): medium to large loads, 1 PDT, input voltage 24 V DC, for assembly on NS 35/7.5, terminal width 6.2 mm
|
PHOENIX CONTACT
|
| FBST6-PLCBU |
Universal PLC Interface with PDT Relay
|
PHOENIX CONTACT
|
| P510 |
AC PHASE SEQUENCE SENSOR 2 PDT OR 4PDT, 10 AMP
|
List of Unclassifed Man...
|
| RIF-1-RSC-LDP-24DC |
Pre-assembled relay module with screw connection, consisting of: relay base, relay retaining bracket, and power contact relay with test button, integrated status LED, and freewheeling diode.
|
PHOENIX CONTACT
|
| NL6EBX-DC110V NL6EBX-DC110V-1 NL6EBX-L2-DC110V NL6 |
NL-relay. 6PDT, 2 Amp, dil. relay. 6 form C. Coil voltage 110 V DC. Amber sealed type. Single side stable. Contact material: gold-clad silver.
NL-relay. 6PDT, 2 Amp, dil. relay. 6 form C. Coil voltage 110 V DC. Amber sealed type. Single side stable. Contact material: gold-cap over silver palladium.
NL-relay. 6PDT, 2 Amp, dil. relay. 6 form C. Coil voltage 110 V DC. Amber sealed type. 2 coil latching. Contact material: gold-clad silver.
NL-relay. 6PDT, 2 Amp, dil. relay. 6 form C. Coil voltage 110 V DC. Amber sealed type. 2 coil latching. Contact material: gold-cap over silver palladium.
|
Matsushita Electric Works(Nais)
|
| TX2-12V |
TX-relay. 2 Amp. High capacity relay with high surge voltage & high breakdown voltage. Standard PC board terminal. Single side stable. Nominal voltage 12 V DC.
|
Panasonic / NAiS
|
| TX2-12V-1 |
Electromechanical Relay: 2 AMP: HIGH CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE
|
Panasonic
|
